Initial Setup DC-D4511WERX DC-D4531WERX

PLEASE READ BEFORE INSTALLING!

Special Note for DC-D4511WERX and DC-D4531WERX Cameras. Please take note that the above cameras are slightly different than our standard IDIS cameras. These cameras do not use the IDIS Protocol and instead use the ONVIF Conformance Protocol to register to NVR's or ISS systems.

The camera has been pre-configured for you:

• IP: DHCP
• Default password: IDISpassword

Scan for this device using 3rd Party Scan in the NVR and use ONVIF Conformance Protocol. If no DHCP server is present IDIS products will use Link-Local addresses (169.254.x.x). To change configuration of these cameras you can download a camera tool software at https://www.idisglobal.com/index/product_view/3170