- Download and install the IPSearch software attached at the end of this article.
- The PVM may have a default IP address of 192.168.0.129. Put your PC IP address to 192.168.0.100 temporarily and launch the IPSearch software.
- Once you find the device (default IP is 192.168.0.129), you can use a browser and log in with "admin/admin" and get into the Network section to change the IP address.
- At the NVR, verify the WAN and the VIN/Advanced Setup are on two different network schemes.
- At the PVM, verify the IP address scheme matches the VIN/Advanced Setup network scheme.
- At the NVR go through camera registration and register the PVM.
- Set up a keyboard on the PVM itself and pull up the camera from there.
Comments
0 comments
Article is closed for comments.