IDIS Fisheye | How to de-warp within exacqVision VMS

Environment:

• exacqVision v26.0.2.0

• DC-Y8D11WRA v1.0.0

  Note: Registered Panomorph Lenses (RPL) number is 'c9vvt'

Procedure:

1. Launch exacqVision Client. In the upper-left corner, select the gear icon to enter the Config (Setup) Page.
2. Navigate to exacqVision Server -> Configure System -> Add IP Cameras -> Camera Recording then select the fisheye camera.

3. Select the 'Digital PTZ / Fisheye' tab, then in the Settings pane, checked 'Enable' to enable settings.

   

4. In the drop-down, select 'ImmerVision' and the appropriate Registered Panomorph Lenses (RPL) number.

   

View de-warp mode:

1. In exacqVision Client, select the monitor icon on the upper-left corner to enter the Live Page.
2. Right-click on the fisheye live video then select 'Fisheye' option in the drop-down list.

3. Select a de-warp mode from the list.