DC-T18A4WR | How to factory default

Environment:

• DC-T18A4WR
• Tool (IP scan) linked below

Procedure:

1. Remove the cover to expose the Reset switch.
   
2. With power on Hold for 5 seconds, then let go.
   
3. Allow the camera to reboot, then run the IP scan tool. 
   
4. Set your PC to the same IP address range as the camera was discovered, if needed.
5. Double-click the IP address or type the IP address into a web browser.
6. Install the IPClocalServer.exe when prompted.
7. Log in to the camera web page. 
   Default: admin/admin ( will be prompted to change the password)
   

8. Live display.