- Download and install the IPSearch software attached at the end of this article.
- The PVM may have a default IP address of 192.168.0.129.
- At the NVR, verify the WAN and the VIN/Advanced Setup are on two different network schemes.
- At the PVM, verify the IP address scheme matches the VIN/Advanced Setup network scheme.
- At the NVR go through camera registration and register the PVM.
- Set up a keyboard on the PVM itself and pull up the camera from there.
XDI | Adding a PVM (CMC26LEDPVID)
Comments
0 comments
Article is closed for comments.