Thermal | How to change the ip address.

Environment: 

• 3212-2000
• 3212-2001
• Tools v1.5_980 (provided below) 

Purpose:

• Change IP address went camera is a different network scheme
• Change IP address connecting directly to the camera

Option 1:

1. Connect to the network the camera is on.
2. Open Tool
   
3. Once open, Click on the magnifying glass 
4. Put a check on the camera detected 
   
5. On the lower-left corner click on the Modify IP menu.
6. Enter the IP address you want the camera to change to and press ok
   
7. Confirm IP address is displaying correctly in the table.
8. Double click the camera in the table and it should direct you to the login webpage for the camera. Done!

Option 2: 

1. Connect to the camera directly (Confirm your network setting is set to the same IP scheme)
   Note: default IP address 192.168.0.121
2. Once you're logged in with the default admin/admin
3. Click on Configuration
   
4. On the left side of the screen click on Devices>Local Network
   
   
   
5. Enter the IP address needed and click Apply.