SmartManager: Assign IP, perform Maintenance, and Upgrade Central Point Devices

Issue:

Basic information on Smart Manager. 

Solution:

1. Open the Smart Manager program.
2. Right-click on the "found" device you wish to work with. 
3. A pop-up box will appear for your selection.  You can Assign a new IP address to a device, perform simple Maintenance, Upgrade the Firmware of the device, Log in to the device, Open the Web Page for the device to get into the device menu and you can Check Status as well.
4. To Assign an IP address click that selection in the drop-down box.  Here is the page you will be presented with.
5. For Maintenance, you have these choices when it is selected.  You can restart the device, Reset the device, or reset to Factory Default.  Clicking on Open Web Page will take you to the device's Web Page to get to the menu inside the device.