Programming and Setting a Home Position

To Set Home Position: 

• Move the camera to the position they want to call home. 
• Press 1 and the home button. You will see an on-screen prompt. 
• Move the camera and then hit the HOME button. If it move to the programmed location, then the PTZ itself has the function activated. 

If you do the above and nothing pops up onscreen then you must activate the function through the PTZ Menu. 

• On the controller hit PTZ MENU using the joystick maneuver your way to DOME SETUP and right-twist the know to enter DOME SETUP. 
• The first option is HOME FUNCTION. Right-twist to enter this mode. 
• Change the first option to PRESET
• Change the second option Function to number 01,
• Change the third option for DURATION you can adjust the time to sit and wait until the camera moves to HOME automatically. 
• Change the fourth option ENABLE to ON.
• Save your settings and back out of the menu.
• Then do the 1 and HOME buttons to test the feature.