AV Megaline: Web page shows rolling lines on some sensors

Issue:

The web page shows rolling lines in the video as shown below. It is difficult to see in a screenshot but has been highlighted. The web page will clearly show this rolling effect.

Resolution:

1. Ensure the camera is on the latest firmware located: www.arecontvision.com
2. In the camera web page, for each sensor:
   • Set the Exposure mode to Speed.
   • Disable Equalize Brightness.
   • Adjust the individual brightness of each sensor.
   • The reference channel used (if applicable) may need to be set.
   • Adjust to 50/60hz as needed.