Juan Ramirez
- Total activity 89
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 29
Articles
Recent activity by Juan Ramirez-
Check FEN error status
Environment: DR-Series XDI Series FEN services Procedure:Click on Setup>Network>FEN menuClick the "Check" button to view the FEN registration and connection status under the 'FEN status' section.No...
-
DR-Series | How to trigger camera alarm out
Envoirment:DR-Series v9.x.xDC-D4000/D6000 Series (DirectIP protocol)DC-T4000/T6000 Series (DirectIP protocol)Diagram:Procedure:Log in to the NVR using an admin account.Click Setup > DEVICE > Setup ...
-
DR-Series | How to upgrade the firmware
Environment:DR-1000 Series DR-2000 SeriesDR-6000 SeriesDR-8000 Series Procedure: Plug in your USB Drive in the front or in the back of the recorder.Note: For USB flash memory devices, the NVR suppo...
-
DC-I6212WRX | Alarm outputs
Environment:DC-I6212WRX3rd-party deviceTechnical Considerations:The IDIS intercom provides two separate outputs with very different power capacities:The Relay (COM / NO/NC): This handles high power...
-
TC-D55xx | How to change output resolution
Environment:TC-D5523 SeriesProcedure:Connect the camera to an analog monitor.Press down into the button to access the on-screen display "MENU" from the camera.Press downward on the button to naviga...
-
IDIS Center | How to change the live image aspect ratio
Environment:IDIS Center Issue: The live image is not filling the viewing panel.Procedure: Option 1Left-click on System>IDIS Center Setup>Video Enhancement.Click the Aspect Ratio drop-down menu and ...
-
IDIS Center | How to export video
Environment:IDIS Center clientProcedure: Click the "Play 1" tab. Left-click and drag the cameras into the window panel from the Site device list. Left-click and drag the RED timeline bar to you...
-
DC-S6xxxx | How to Factory default setting.
Environment:DC-S68xx SeriesDC-S66xx Series DC-S64xx SeriesDC-S62xx SeriesProcedure:Note: Only use the factory reset button to restore the camera to its factory default settings. A factory...
-
DC-S6xxxx | How to Factory default setting.
Environment:DC-S68xx SeriesDC-S66xx Series DC-S64xx SeriesDC-S62xx SeriesProcedure:Note: Only use the factory reset button to restore the camera to its factory default settings. A factory...
-
DR-Series | How to create a Self-Diagnosis report
Environment:DR-1000DR-2000DR-6500DR-8500Purpose:When there is a problem with the NVR system, generate reports for troubleshooting.ProceduceGo to the "Setup" icon on the front panel console.Click "S...