Dara Kim

Product Features IDIS Center is software for monitoring live videos and playing recorded videos acquired from compatible devices. It provides the following features:• Remote surveillance of live vi...

Download IDIS Center v6.7.0 for I-Mobile System (at the time of this writing) by clicking HERE. Download WebView2 runtime by clicking HERE. An Administrator account is required. Prior to installin...

Device groups can be used to logically organize cameras (interior cameras, exterior cameras, 1st floor, 2nd floor, etc.) Click System > IDIS Center Setup > Device. Click Device Group. (There is de...

Live videos of registered sites can be monitored using IDIS Center. IDIS Center receives videos according to the device's settings and displays live videos. Up to 4 Live panels are supported for mo...

Verify the recorder is added to the Site panel. Click on the Play tab. If it was closed, click System > New Tab > Play. Click and drag the recorder or specific camera(s) into the Play tab. A timel...

Will the redundancy server automatically detect this as well and start recording from the failover server? The Redundancy server would not be affected by the main ISS server crashing, as that is a...

While larger hard drives may function correctly in your system, they are not officially supported unless they are on our approved hard drive list. The list is subject to change based on ongoing com...

Download the file attached at the end of this article. Unzip it then run the program and click Lookup. Highlight the camera then click Management > System Log. Click Find then Save. When the Save ...

From the physical recorder:Insert a USB formatted with FAT32 into the recorder.Log in with an admin account.Click System > General > Troubleshooting Reporting.Click the + icon, then click Yes.Wait ...

EnvironmentIDIS 360 fisheyeCVS 360 fisheyeDR-2xxx seriesIssue: When View mode is set to "Original", there will be no option to Dewarp on an IDIS/CVS fisheye from a DR-2xxx series NVR.Confirm settin...