Dara Kim
- Total activity 71
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 28
Articles
Recent activity by Dara Kim-
DC-T18A4WR | Configuring Loitering
Check the firmware version.Apply any firmware updated as needed.Configure NTP on the camera. Specify an NTP server if one is available.Click IVS > Multi-Loitering.The below is a basic template.Togg...
-
MCD-CMT-W | Pole diameter
The pole diameter of the MCD-CMT-W is 3.75 cm.
-
RISE and 3rd party VMS validations
As of November 20, 2025 CostarHD RISE Series cameras will no longer be validated against any 3rd party VMS.
-
How to add IDIS cameras to 3rd party VMS.
Download and install IDIS Discovery: https://idisamericas.com/en/productslist/350 Click Lookup > Lookup Devices LAN. Right click on the camera and select Remote Setup. It will prompt you to set t...
-
How to add IDIS cameras to 3rd party VMS.
Download and install IDIS Discovery: https://idisamericas.com/en/productslist/350 Click Lookup > Lookup Devices LAN. Right click on the camera and select Remote Setup. It will prompt you to set t...
-
DR Series: Configuring an alarm input to trigger an alarm output
Take the wires from the camera and wire it to AI1 and G on the back of the NVR.Take the NO and C and wire it to a voltmeter.Log in to the NVR and go to Setup > Device > Schedule.Click the Channels ...
-
AV Firmware Updates
Instructions: Click the link next to the camera. Click the specific file you need then click Download, or click Download Folder to download everything. Use the appropriate tool (Firmware Loader or ...
-
DC-I6212WRX | How to get intercom calls on IDIS Mobile Plus with push notifications
Environment:IDIS Mobile Plus v1.7.0DC-I6212WRX v1.2.0NVR models: 2500, 3500, 6500, 8500 (with v8.8.1 or later)The intercom must be registered to the NVR.You must configure remote access to the NVR....
-
DC-I6212WRX | How to get intercom calls on IDIS Mobile Plus with push notifications
Environment:IDIS Mobile Plus v1.7.0DC-I6212WRX v1.2.0NVR models: 2500, 3500, 6500, 8500 (with v8.8.1 or later)The intercom must be registered to the NVR.You must configure remote access to the NVR....
-
IDIS Discovery: Applying the same password to multiple cameras (initial setup)
Download IDIS Discovery from here: https://idisamericas.com/en/product/3055 Unzip and run the program. Click Lookup > Look Up Devices (LAN). By default, when you right click a camera and select R...