Dara Kim
- Total activity 71
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 28
Articles
Recent activity by Dara Kim-
ISS | How to perform an in place update
Environment:Updating ISS 5.0.1901 to 5.1.0.Verify you have the admin account password.Click Start > IDIS Solution Suite > License Tool.The Licensing Tool will appear. Currently we cannot maximize t...
-
StarNET Pro Update
StarNET Pro v3.8.0 can be directly updated to 5.1.0. No incremental update is needed.If you were using the default password it will force you to change it. The password change was made in StarNET P...
-
Does the DP-DE2108 support RTSP streams?
No, it handles DirectIP streams only.
-
DC-T18A4WR | Configuring Loitering
Check the firmware version.Apply any firmware updated as needed.Configure NTP on the camera. Specify an NTP server if one is available.Click IVS > Multi-Loitering.The below is a basic template.Togg...
-
MCD-CMT-W | Pole diameter
The pole diameter of the MCD-CMT-W is 3.75 cm.
-
RISE and 3rd party VMS validations
As of November 20, 2025 CostarHD RISE Series cameras will no longer be validated against any 3rd party VMS.
-
How to add IDIS cameras to 3rd party VMS.
Download and install IDIS Discovery: https://idisamericas.com/en/productslist/350 Click Lookup > Lookup Devices LAN. Right click on the camera and select Remote Setup. It will prompt you to set t...
-
How to add IDIS cameras to 3rd party VMS.
Download and install IDIS Discovery: https://idisamericas.com/en/productslist/350 Click Lookup > Lookup Devices LAN. Right click on the camera and select Remote Setup. It will prompt you to set t...
-
DR Series: Configuring an alarm input to trigger an alarm output
Take the wires from the camera and wire it to AI1 and G on the back of the NVR.Take the NO and C and wire it to a voltmeter.Log in to the NVR and go to Setup > Device > Schedule.Click the Channels ...
-
AV Firmware Updates
Instructions: Click the link next to the camera. Click the specific file you need then click Download, or click Download Folder to download everything. Use the appropriate tool (Firmware Loader or ...