Dara Kim
- Total activity 71
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 28
Articles
Recent activity by Dara Kim-
DC-I6212WRX | How to get intercom calls on IDIS Mobile Plus with push notifications
Environment:IDIS Mobile Plus v1.7.0DC-I6212WRX v1.2.0NVR models: 2500, 3500, 6500, 8500 (with v8.8.1 or later)The intercom must be registered to the NVR.You must configure remote access to the NVR....
-
DC-I6212WRX | How to get intercom calls on IDIS Mobile Plus with push notifications
Environment:IDIS Mobile Plus v1.7.0DC-I6212WRX v1.2.0NVR models: 2500, 3500, 6500, 8500 (with v8.8.1 or later)The intercom must be registered to the NVR.You must configure remote access to the NVR....
-
IDIS Discovery: Applying the same password to multiple cameras (initial setup)
Download IDIS Discovery from here: https://idisamericas.com/en/product/3055 Unzip and run the program. Click Lookup > Look Up Devices (LAN). By default, when you right click a camera and select R...
-
DC-S6xxxxx | Factory reset button location
The factory reset button is located under the black cover. Shut off the power supply, separate the dome cover. Insert a straight pin into the switch hole, and press down on the reset switch.Hold th...
-
DC-S6xxxxx | Factory reset button location
The factory reset button is located under the black cover. Shut off the power supply, separate the dome cover. Insert a straight pin into the switch hole, and press down on the reset switch.Hold th...
-
DR Series | DNS server is not working
Issue:The client can ping the DNS server but the error "DNS server is not working!" appears when they click Test. Resolution:Verify the firewall is off on the NVR.Setup > Network > Firewall.Use an ...
-
DR series: Adding cameras over a public WAN
Resolution: At the remote site: From each camera webpage, go to Network > Port/QOS and change the remote port to unique numbers. The default port is 8016. In the above diagram, the ports used are 8...
-
DP-DE2108 | OSD and Self Diagnosis show recording fail
Environment:CR3210XDI-3TB v3.8.2DP-DE2108Image seen:Resolution: DP-DE2108 is not compatible with the 10XDI series.
-
DP-DD1316 or CMIPVM25 | All server channels being used
Environment:DD-DD1316CMIPVM25XDI v8.8.1Cameras added to the decoder will need to have a password set on them before it can be added.From the NVR > Setup > Camera > General > Click the password dots...
-
ConteraVMS: How to add IDIS cameras
Environment:Contera version 3.2.7.293DC-D4236HRX Resolution:Download and run the IDIS Discovery tool. The file is attached below.Right click the camera and select "Remote Setup". Enter a password a...