Hung Phan

Issue: How do I factory reset the 25 Series XDI? Required Tool: Paper Clip or straight tip tool.   Resolution: Power the recorder down by removing the power plug.  Locate the Reset Button Per XDI ...

Issue:  JQuery v1.9.0 Vulnerability was detected on the latest release of 20 Series XDIs v7.5.3   Resolution:  The JQuery vulnerability is caused by WebGuard being enabled for HTTP interactions.  T...

To turn Sequencing ON or OFF:   Press the MATRIX SEQ button on the controller.

To Set Home Position:  Move the camera to the position they want to call home.  Press 1 and the home button. You will see an on-screen prompt.  Move the camera and then hit the HOME button. If it ...

Power Over Ethernet: IEEE 802.3at  

The CX4500 System Control Keyboard can control up to 256 PTZs and 8 CX3208N matrices. In a typical Walmart/Sam's Club application, it will control an average of 32 PTZs and one (1) CX3208N matrix. ...

**NO CHANGES should ever be made at the PTZ dip-switch bank located on the top of both the CDT2H22MT and CDT2H22MTO.** For multi-dome installations, it is recommended that only one (1) PTZ be insta...

Issue: You need to mount a CDI2512xxxx camera to a wall to get a good view of the location along the wall.  Once mounted you realize the Gold ribbon cable can only spin around so far and you can no...