Hung Phan

  • Total activity 1403
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 804

Articles

Recent activity by Hung Phan Recent activity Votes
  • ConteraIP | How to focus a OMNI

    Environment: AV20576DN AV8576DN Procedure: Connect to the camera by entering the IP address into the PC/Laptop webpage. (firefox, chrome, edge) Default IP Address: 192.168.1.168 Log into the ca...

  • ConteraIP Omni LX RS | Camera Position options

    Environment AV20476RS AV20576RS AV20576RSIR AV32576RSIR Camera Preset Configurations: The AV Constar ConteraIP Omni LX RS camera supports three(3) predefined camera preset configurations:180 degr...

  • AV800/AV1600 | Restore to default

    Issue:  Restore back to default  Password issue  Procedure: Restore default: Press and hold the "Reset" button for 10 secondsNote: Use a paper clip to hold the button down.  The User name and p...

  • ConteraIP: Lens Spacers Required

    The following Camera series require a Lens Spacer:  ConteraIP MicroDome Duo MicroDome LX ConteraIP Omni LX Contera Lens Spacers part number: M003591-01   Note:  Refer to the manual for changing...

  • How to Access Costar Video FAQ's

    You can still access Costar Video FAQ's through the following URL: https://support.costarvideo.com/  

  • How to Access CostarHD FAQs

    You can still access CostarHD FAQ's through the following URL: https://support.costarhd.com/  

  • How to access Arecont Vision FAQ's

    You can still access Arecont Vision FAQ's through the following URL: https://support.arecontvision.com/  

  • Contera CID/CLD-200 Dark Image IR Issue

    Issue:  Contera CID/CLD series camera image can remain dark even with the IR enabled.  Resolution:  Login to the camera web page. Click on the "Image" menu Use the slide-down bar to get to "WDR M...

  • How to factory default a ConteraIP Omni LX

    Issue: Forgotten Password  Hardware/software Environment: Omni G5 AV20576DN-xx Procedure: Reset to Factory Default While the camera is powered on, Press and hold the reset button for 2 to 5 s...

  • Contera: Corridor View Configuration

    Issue:  How to configure the camera for Corridor View.   Resolution:  Corridor View is a setting within the camera that can be configured for 90 degrees of change of view for a better view down any...