ConteraIP EX: Analytics Basics

Best Practices to observe when working with ConteraIP EX Analytics:

• The dome cover and camera lens should be clean and focused.
• Objects should be properly calibrated.
  • It is suggested to set the minimum object size to half the width and height of the average object.
  • It is suggested to set the maximum object size to about 130% of the width and height of the average object.
  • If two objects are detected as one, reduce the maximum size of the object.
  • If one object is detected as two, increase the minimum and or maximum size of objects.
• To minimize the effects of noise reduce the sensitivity.
  • For night or low contrast scenes the sensitivity may be increased to 90 - 95%.
  • For bright, noisy or sharp scenes the sensitivity can be adjusted to 60 -75%.
• The form factor of the EX series does not differ from a normal ConteraIP camera.
• EX series has similar performance as the ConteraIP Outdoor Dome and Bullet.
• EX series come with 32MB of flash memory.
• EX series is only releasing in the 5MP resolution at the moment.

Only 1 analytic behavior can run at a time.  

• Motion Detection and Camera Tamper
• Intrusion Detection
• Line Crossing
• Loitering
  Optional Advanced Analytics - License Required: 
• Object Left Behind or Removed
• People or Vehicle Counting