exacqVision: How to add a camera using ONVIF

Environment:

exacqVision Client version 19.12.4.0
exacqVision Server version 19.12.4.0
AV12CPD-236 version version 37101

Issue:

An Arecont Vision camera (i.e. AV12CPD-236) needs to be added to an exacqVision server.

Resolution:

1. Go to the webpage of the AV12CPD-236.
2. Click Setup > User > Add.
   
   
   
   
3. Provide a username and password then click OK. In this example, the below was used.
   • Username: onvif
   • Password: onvif
     
     
     
     
4. Click Time and next to Sync Mode select your appropriate setup then click Save.
   
   
   
   
5. In the exacqVision client click Setup > Add IP Cameras.
   
   
   
   
6. Click Find IP Cameras > Rescan Network > Select the AV12CPD-236.
   
   
   
   
7. Click Add Selected.
   
   
   
   
8. Enter the username and password from Step 3.
   
   
   
   
9. Within a minute the status should say Connected.
   
   
   
   
10. Click Live and drag the camera over to the panel.